FuzzRope & Neon Rope Installation Guide | RaveBeetle LED Light Setup Tutorial

🔮 FuzzRope Installation Guide

Light up your RaveBeetle elytra hydration pack in style! This guide shows you exactly how to install your FuzzRope LED light and get your pack festival-ready.

🎥 Watch the Video Tutorial

⚡ Step-by-Step Setup

  1. Unpack Your FuzzRope – Make sure you have the LED rope, receiver, and power cable ready.

  2. Attach the Rope – Start from one side of your pack and wrap it around evenly for a balanced glow.

  3. Connect the Receiver & Power – Plug in the connector and test the lighting.

  4. Secure the Wire – Keep the rope snug and tuck the receiver safely inside your pack. The pockets on both sides of the main compartment are designed for convenient wire storage, keeping everything neat and protected.

  5. Light It Up! – Power on with power bank and test your colors and effects.

📏 FuzzRope Length Options

We’re demonstrating with the 6-foot FuzzRope, which wraps around the Elytra Hydro Pack twice for a full-glow effect.
If you prefer a single wrap, choose the 3-foot FuzzRope for a simpler look.

💡 Pro Tips

  • Route the rope to avoid snags or pulls while you dance.

  • Use the app or the button on the receiver to control lighting during festivals — the remote may not work well since the receiver is inside the pack.

  • Always fully charge before your event and bring a backup power bank.

🛍️ Shop Accessories

👉 Shop FuzzRope and Glow Gears Accessories