Bring your FLOWt Pack to life with GlowLoop or LumiLights! 🌈✨
What You’ll Need
-
For GlowLoop: PowerBoost * 1
-
For LumiLights: AA batteries *2
Step 1: Connect & App Setup
-
For GlowLoop, connect the LED strap to the receiver
-
Scan the QR code on the receiver to download the control app.
-
Open the app and pair your GlowLoop to confirm it’s working.
Step 2: Route the Cable & Start Your Design
-
Feed the GlowLoop (or LumiLight) cable through the oval metal ring on the inside of the pack.
-
Pull the GlowLoop cable out through the ring.
Step 3: Style Your Lights
-
Pull the GlowLoop cable (or LumiLight) all the way out and begin your design through the loops on the pack.
-
When you’re done, bring the remaining GlowLoop/LumiLight cables back to the oval ring, feed it through, and store the extra cable and the receiver in the mesh pocket so everything stays organized and tangle-free.
Step 4: Light It Up
-
The GlowLoop will turn on once it’s plugged into the PowerBoost. You can control the power and switch modes through the app.
-
Customize colors, patterns, and effects to match your vibe.
✨ You’re ready to glow—have an amazing time!
