Festival season can be tough on your gear. After a long weekend of dancing, traveling, and outdoor adventures, your pack may start to collect dust, dirt, fingerprints, or festival grime. The good news is that cleaning your clear TPU pack is quick and simple when you use the right method.
In this guide, weโll show you how to clean your RaveBeetle pack and help keep it looking fresh for your next festival, rave, or adventure. This cleaning method is not only for RaveBeetle packs. It can also be used on most TPU material packs.
What Youโll Need
-
A dirty pack (This cleaning method is for TPU material packs.)
-
Two soft clean cloths
-
Swan 99% Isopropyl Alcohol
Step 1: Empty Your Pack
Before cleaning, remove everything from your pack. Take out your hydration bladder, accessories, personal items, and any removable front covers and accessories.
This helps you clean the surface more easily and prevents alcohol from touching items that should not be cleaned with alcohol.
Step 2: Apply Alcohol to the Cloth
Pour a small amount of 99% isopropyl alcohol onto one clean cloth. You do not need to soak the cloth, a small amount is enough.
Avoid pouring alcohol directly onto the pack. Applying it to the cloth first gives you better control and helps prevent using too much product.
Step 3: Wipe the TPU Surface
Use the alcohol cloth to gently wipe the dirty areas of the pack. Focus on spots with fingerprints, dust, smudges, or festival dirt.
For clear TPU material, wipe slowly and evenly. Do not scrub too aggressively, especially around printed areas, seams, zippers, or coated parts.
Step 4: Use a Second Cloth to Dry and Buff
After wiping the pack with alcohol, use the second clean cloth to dry the surface and remove any leftover residue.
This step helps the clear TPU material look cleaner and smoother.
If the pack is not fully clean on the first try, repeat the same steps until the surface looks clean.
Step 5: Let the Pack Air Dry
After cleaning, leave the pack open and allow it to air dry completely before storing it or using it again.
Make sure the pack is fully dry before putting your hydration bladder, accessories, LED screen, or personal items back inside.
Important Cleaning Tips
Do not put LED accessories, power banks, or electronic parts near alcohol or water.
Do not use a dryer.
Do not use harsh brushes or rough scrubbing pads.
Always test on a small hidden area first, especially if your pack has special coating, color, print, or custom material.
Final Thoughts
Keeping your RaveBeetle pack clean helps it stay fresh and ready for your next festival. With two clean cloths and 99% isopropyl alcohol, you can quickly wipe down most TPU material packs and remove everyday dirt, dust, and smudges.
Watch the full cleaning video on the RaveBeetle YouTube channel for a step-by-step visual guide.
